9) how to adjust the perforation location, Caution – MBM Corporation AEROCUT User Manual
Page 17
Advertising
(9) How to adjust the perforation location
① When using the perforator, the screen will display where to fix the perforator, as shown
below.
② Set the lower blade to the right end of your desired scale and fix it.
③ Set the upper blade lightly against the lower blade and fix it.
④ Adjust the rest of the aid rollers according to the paper size so that the paper feeding will go
smoothly.
Lower Blade
Scale
Upper Aid Rollers
Upper Blade
Lower Aid Rollers
Hexagonal Wrench
Lower Aid Rollers
Upper Blade
Caution
１６
Avoid the combined use of the creaser and the
perforator, as it may cause a paper jam or a
mechanical failure.
Avoid contacting the cutting edge of the
perforating blade. Otherwise, injury could occur.
Advertising