MBM Corporation 82 - Manual (Page 9)

Stapler Folder Model 82 Operator Manual
T10136
3.3 Jam indications
1. Staple(s) missing indicator
The Staple(s) missing indicator is illuminated when a set is
missing one or two staples. The Model 82 will automatically
stop the on-line system when this indicator LED is lit.
Upon indication after loading a new staple cartridge, open
and close the Top cover. The Model 82 will now cycle and
advance staples on the same set for a maximum of 5
stapling cycles or until staples are resumed. Replacing the
staple cartridge is described in section 5.
2. Stacker full indicator
The Stacker full indicator is lit when the belt stacker or the
delivery tray is full. Remove the finished sets. As soon as the
stacker full sensor is clear the indication will go off. The
Model 82 will automatically stop the on-line system when this
indicator LED is lit. All sets already fed from the Collator will
be processed until full stoppage.
3. Paper jam indicator
The Paper jam indicator is illuminated when an operation in
the Model 82 is not done within the preset time. Open the
top cover and remove the jammed sets reachable, close the
top cover and the Model 82 will automatically purge
remaining jammed sets. Model 82 will automatically stop the
on-line system when this indicator LED is lit.
3-2