MBM Corporation TRIUMPH 4850 - Manual (Page 21)

- 21 -
B
A
B
C
A
Position the paper on the backgauge (A) and
side lays left or right (B).
To move paper stacks, please use the paper
knock-up block (C) provided.
(Run backgauge to the front for turning the
paper stack).
• Operation •
Only 4815
Clamping is released by the hand-wheel.
Before every cut lower the clamp by turning the
hand-wheel to the right and tighten with a light
twist.
IDEAL 4815
Press both actuators of the two-handed control
system activation (A) simultaneously and them
pressed until the paper is completely cut.