MBM Corporation TRIUMPH 4850 - Manual (Page 24)

- 24 -
IDEAL 4815 • IDEAL 4850
• Blade and cutting stick replacement •
If the cutting quality decreases:
• Check the cutting depth (see page 32).
• Check the cutting stick (see page 28).
• Replace or grind the blade (see page
24 - 32).
The blade cannot be ground if the blade
height is less than 83 mm/3,29 inches.
A new blade must be used.
The blade may only be ground by a qualified
supplier or from the manufacturer
Krug & Priester, D-72336 Balingen.
Danger! Risk of injury!
The blade is extremely sharp. Do not
extract or transport the blade without
protection. Changing the blade may only be
performed by trained staff.