MBM Corporation TRIUMPH 4850 User Manual
Page 22
Advertising
- 22 -
IDEAL 4815 • IDEAL 4850
A
+ =
+ =
+ =
IDEAL 4850
IDEAL 4850
The clamp moves automatically when cutting
is activated.
The paper can also be pressed in advance.
Clamping and cutting is activated by
pressing actuators (A) on the front table.
•
Operation
•
+ =
+ =
+ =
Switch position 1
Switch position 2
Pre-clamping
Press down both actuators to step 1
Clamp returns
Press down completely one of the actuators
Cutting sequence with automatic clamping
Press down both actuators to step 2
IDEAL 4850
The actuator has 2 switching steps:
1. pre-clamping
2. automatic clamping and cutting
Advertising
This manual is related to the following products: