MBM Corporation 5221-EC - Manual (Page 4)

IDEAL 4810-95 EP; IDEAL 4850-95 EP; IDEAL 5221-95 EP; IDEAL 6550-95 EP
4
03-01-10 B5221G2w.doc
1. General
s Danger!
Non-compliance of the instructions may
endanger persons.
l Warning!
Non-compliance of the instructions may
cause damage to the machine.
This instruction manual helps you to learn the
safe and comfortable operation of this machine.
Before working with the machine please read
these instructions carefully and consider the
safety regulations.
The operating instructions must always be
available for the operator.
Machine is proved by GS- and CE.
s Danger
Only instructed persons are allowed to
operate the machine.
No operation by children.
All components which may endanger the
operator are covered by a safety-guard. This
machine is only designed for “one-man
operation”.
The cutting action which is dange-
rous to the operator is protected through a
safety-guard (1) and a two-handed control
system (2).
1.1 Application
The machine is designed for cutting reams of
paper to a specified dimension. Dimension
setting may be performed via keys or manually
at the rotary control. The cutting takes place
through the "two-handed control system".
l Warning!
The machine may only be used for cutting
paper or similar materials. Clips etc. will
damage the cutting blade.
s Danger!
The cutting of hard material or material
which might splinter is forbidden.