MBM Corporation EBA 435 E User Manual
Page 12
Advertising
- 12 -
EBA 435 E • EBA 435 EP
Assembly of stand:
2 strong people are required to lift the
machine out of the packaging.
• Lay the machine on the floor side
wards (1.).
• Remove the lower cover (2.)
• Place the cutter correctly onto the
machine stand. Fit the 4 washers and
tighten the 4 hexagon nuts with a spanner (3).
• Screw on the lower cover (4.)
• Install the machine.
•
Installation
•
Advertising
This manual is related to the following products: