MBM Corporation EBA 435 E - Manual (Page 42)

- 42 -
EBA 435 E • EBA 435 EP
cm
inch
EBA 435 E/EP
Cut cannot be made.
• If cover is open:
close it.
• If cover is closed:
open and re-close it. (Security check).
Onlly EBA 435 EP
Cut cannot be made.
• Measurement has not been reached
correctly.
• LED "S" X does not turn off.
Push the S button again.
Check the security cover (see above)
• Measurement below 9 cm
Hold the S S S S S button O until the
measurement is achieved.
• Backgauge I does not move, the display
shows " C "
Turn the pressing lever E to the right.
• Backgauge I does not move to position
(pressing lever has been turned to the right).
" C " is in the display
inform service people.
•
Possible malfuntions
•