Montigo RX82 - Manual (Page 10)

10
REMOTE ACTUATED 120V AUXILIARY OUTPUT
The auxiliary function allows switching of one additional electrical accessory on and off.
To activate this function use the Mode key to activate the relevant icon, see Fig. 16.
Then use the UP/DOWN arrow key to set ON or OFF the auxiliary output, see Fig. 17.
An acoustic signal is generated to confirm the reception of the command.
Fig. 16 Fig. 17
The duration of the Remote Control batteries depends on
many factors: the quality of the batteries used, the number
of ignitions of the appliance, the number of changes to the
flame height, etc.
When the transmitter batteries are low, an icon will be
displayed on the LCD display (see Fig. 19) to alert of a low
battery condition before losing battery power at all. As soon
as the depleted batteries are replaced, the Transmitter will
restart its normal operation.
L O W B AT T E RY D E T E C T I O N
Fig. 19
When the FCM is used, the communication bus provides supply voltage to the Receiver. If the
main power is lost, the Receiver continues to operate since it is supplied by internal batteries. The
appliance can be switched on manually by moving the 3 position slider switch on the Receiver to
the ON position.
B A C K U P F U N C T I O N
With this function it is possible to deactivate the remote
control keys. The function is active when the lock icon is lit,
see Fig. 18.
To activate this function press simultaneously the MODE key
and the UP arrow key.
To deactivate this function press simultaneously the MODE
key and the UP arrow key.
C H I L D S A F E T Y L O C K - O U T
Fig. 18