Montigo RX82 - Manual (Page 9)

9
SMART THERMOSTAT
The Smart Thermostat adjusts the flame height in accordance to the difference between the
set point and the room temperatures. As the room temperature gets closer to the set point
the Smart Function will modulate the flame down. If the room temperature is cool the
Smart function will modulate the flame up.
To activate this function press the THERMOSTAT key until the word "SMART" appears to the
right of the temperature bulb graphic, see Fig. 12. Then use the UP/DOWN arrow key to set
the desired room temperature, see Fig. 13. The control system will cycle the appliance on or
off to maintain the selected temperature.
Fig. 12: Smart flame function Fig. 13
Fig. 15
FAN SPEED CONTROL
This function controls the speed of the hot air circulating fan if the appliance is equipped
with one.
The fan speed can be set from off to one of four (4) levels. To activate this function use the
Mode key to set the relevant icon on the display, see Fig. 14. Then use the UP/DOWN arrow
key to set the desired fan speed or turn off, see Fig. 15. An acoustic signal is generated to
confirm the reception of the command.
Fig. 14