Montigo RX82 User Manual
Page 5
5
The PROFLAME Receiver may be installed in a standard single gang wall switch box or in a low
temperature area of the hearth appliance. The receiver accepts commands from the transmitter
to operate the functions included with a particular Proflame system configuration.
The receiver can be set to one of three positions: On (manual override), Command (remote con-
trol) or Off.
R E C E I V E R
3 Positions Slider
PRG Key
Fig. 3: Remote Control display.
12 PIN terminal
Fig. 4: Fan Control Module.
Fan Control Module (FCM) is available and offers the ability to control fan speed from Off throu-
gh 4 speeds, a remotely actuated 120V auxiliary outlet, a constant 120v outlet and feeds DC
power to the receiver saving the batteries until there is an interruption of line power.
FA N C O N T R O L M O D U L E
MAINS VOLTAGE
SUPPLY CORD
MODULE ON/OFF SWITCH
COMMUNICATION BUS (3 PIN)
FAN OUTLET PLUG
MAINS VOLTAGE PLUG
AUX OUTLET PLUG