Nevion Multicon - Manual (Page 47)

Flashlink Web Interface 47
ID: man-multicon Multicon Manual Rev. L
Figure 8.8 Flashlink stored configurations
The card number is constructed of <frame_number> and <slot_number> - 1, in this case the mod-
ule is in frame 1 and slot 2. Click OK to execute the command.
8.6 Flashlink Firmware Upgrade
Newer Flashlink cards may be firmware upgraded from the Multicon web interface. Please contact
support if firmware upgrade of older Flashlink cards is required. Currently the following Flashlink
cards are supported:
• ARC-SD-DMUX
• D-422-MG
• DA3G-HD
• DWC-HD-DMUX
• FRS-HD-CHO
• FRS-HD-DMUX
• AAV-HD-DMUX
• AAV-HD-XMUX
• AAV-SD-DMUX
• AAV-SD-XMUX
• All new Flashlink cards released in 2010 and later
The firmware upgrade process is described in detail below. Note that some modules require only
micro-controller upgrade while modules with FPGA may also require a FPGA upgrade.