Olson Technology MUSCLE-EM55X - Manual (Page 14)

OTOT-EM55X/XL Optical Transmitter Rev. x1 www.olsontech.com
13
Test Configurations
Booster
EDFA
1
st
Fiber
Length
In-Line
EDFA
2
nd
Fiber
Length
Rx
Tx/Rx no no no no 0dBm
Link 1 no 35km no no 0dBm
Link 2 16dBm 65km no no 0dBm
Link 3 13dBm 52km 13dBm 52km 0dBm
RX with 7 pA/ √Hz input noise current density.
EDFA’s with 5dB noise figure.
RF input level at 80dBuV / TV channel.
General Properties
Parameter Units Specifications
Side Mode Suppression [dB] >30
Relative Intensity Noise
(Opt. Return Loss < -40 dB) [dBc/Hz] <-158,
typ. <–160
Optical Connector SC/APC (standard), FC/APC (optional)
Optical Fiber Standard Single Mode 9/125 µm
Nom. Input level per TV channel [dBµV] 80
RF Monitor Output Level [dB] -20 dB ( +0.2 to -0.8 dB @ 862 MHz, -1.3 dB @ 1 GHz)
Dynamic Range of AGC [dB] +3 to –6
RF-Connector/ Impedance IEC 169-2/75Ω or F-female, 75Ω, front or rear side mounted
Return Loss [dB] > 20 (47 MHz) – 1,5 dB/oct., min. > 15
Climatic Specification
Operation
Storage
ETS 300 019, class 3.1
ETS 300 019, class 1.2
EMI EN50083-2 (April 1996)
EN50083-2 /A1 (February 1998)
Power Supply
Dual redundant, hot pluggable 100...240 V
AC
36...72 V
DC
Power Consumption [W] <=60
Enclosure 19” / 1 RU (optionally compatible to ETSI or JIS standards)
Weight [kg] 9.7
Weight [lbs] 21.4