OpenEye OE2-E480 - Manual (Page 23)

29081AD 23
SETUP
SYSTEM
SYSTEM SETUP
To enter System Setup, press ENT on the front of the DVR. Use the arrow buttons on the front panel of the DVR or the remote
control to navigate the display. Select Save and press ENT to update settings.
VIDEO FORMAT – AUTO / NTSC / PAL [ User Selectable ].
LANGUAGE – ENGLISH / KOREAN / JAPANESE / GERMAN / TURKISH / SPANISH / PORTUGUESE / RUSSIAN /
HEBREW [User Selectable].
SYSTEM ID – 0~19. [Required for operation of multiple units using the supplied IR remote control. Each system must
have a unique ID to function properly.]
DATE FORMAT – ASIA (YYYY/MM/DD) / US (MM/DD/YYYY) / EURO (DD/MM/YYYY) – [User Selectable].
TIME ZONE – press ENT to open the GMT Time Zone Window. Use the arrow keys to navigate the list and press ENT
to make selection. Select Save and press ENT to close the window.
Note The date and time must be set manually; changing the time zone will not automatically change the Time/Date
display.
DATE/TIME – Press ENT to open the Date Window and use the arrow keys to set the date. Press ENT to close the
window. Repeat to set the time.
NTP – ON/OFF (Network Time Protocol) [Synchronize the DVR with the network time].
KEYPAD BEEP – ON/OFF [Enables / Disables audible keypad touch confirmation].
AUTO LOG OFF – OFF ~ 10 minutes [This feature logs off users after XX minutes of inactivity. This is a security feature].