Sansui SLEDVD329 - Manual (Page 37)

37 EN
Connections to other equipment
Using an AV Amplifier with built-in digital surround
If you are using an AV Amplifier with built-in digital surround sound, you can enjoy various audio systems
including Dolby Digital Surround audio that sounds just like the movie.
Connect an AV Amplifier with built-in Dolby Digital decoder, etc. as shown below.
NOTE:
When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.
There will be no sound output if connected to an AV Amplifier with a built-in DTS decoder or MPEG decoder.
•
Coaxial digital cable
(not supplied)
Center Speaker
To DIGITAL AUDIO
COAXIAL OUT
To Coaxial
Digital Audio Input
Right of the unit
Front
Speaker
(Left)
Front
Speaker
(Right)
Subwoofer
Surround
Speaker (Left)
Surround
Speaker
(Right)
TV/DVD
AV Amplifier with built-in digital surround decoder
To connect an audio system
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the
TV’s remote control.
NOTE:
To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set
above 0 (zero).
•
To Audio (L) Input To Audio (R) Input
Audio cord (not supplied)
Amplifier
Right of the unit
To AUDIO (L/R) OUT
J59C0321A_EN.indd 37 J59C0321A_EN.indd 37 11/27/12 5:22:48 PM 11/27/12 5:22:48 PM