Safety rules, Warning – Partner P350S 2014 User Manual

Page 3

Advertising
background image

-- 3 --

WARNING:

When using gas tools,

basic safety precautions, including the

following, should always be followed to

reduce the risk of serious personal injury

and/or damage to the unit. Read all these

instructions before operating this product

and save these instructions.

WARNING:

This machine produces

an electromagnetic field during operation.

This field may under some circumstances

interfere with active or passive medical

implants. To reduce the risk of serious or

fatal injury, we recommend persons with

medical implants to consult their physician

and the medical implant manufacturer

before operating this machine.

WARNING:

This tool is designed

only for use by one operator and intended

for forest work. This tool is designed only to

be operated with the right hand on the rear

handle and the left hand on the front handle.

The operator must read and understood the

safety requirements in the instruction

handbook and using the appropriate

personal protective equipment (PPE) before

operating this tool. This tool is not designed

for cutting unintended material, such as

rubber, stone, metals or wood products not

clear of foreign objects.

DO NOT operate a chain saw with one

hand! Serious injury to the operator,

helpers, bystanders, or any combination

of these persons may result from one-

handed operation. A chain saw is

intended for two-handed use.

DO NOT operate a chain saw when you

are fatigued, under the influence of drugs,

alcohol or medication.

Use safety footwear, snug-fitting clothing,

protective gloves, and eye, hearing

and head protection devices.

Use caution when handling fuel. To

avoide fire, move the chain saw at least

10 feet (3m) from the fueling point before

starting the engine.

DO NOT allow other persons to be near

when starting or cutting with the chain

saw. Keep bystanders and animals out of

the work area.

DO NOT start cutting until you have a

clear work area, secure footing, and a

planned retreat path from the falling tree.

Keep all parts of your body away from the

saw chain when the engine is running.

Before you start the engine, make sure

that the saw chain is not contacting

anything.

Carry the chain saw with the engine

stopped, the guide bar and saw chain to

the rear, and the muffler away from your

body.

DO NOT operate a chain saw that is

damaged, improperly adjusted, or not

completely and securely assembled. Be

sure that the saw chain stops moving

when the throttle control trigger is

released.

Shut off the engine before setting the

chain saw down.

Use extreme caution when cutting small

size brush and saplings because slender

material may catch the saw chain and be

whipped toward you or pull you off

balance.

When cutting a limb that is under tension,

be alert for springback so that you will

not be struck when the tension in the

wood fibers is released.

Keep the handles dry, clean, and free of

oil or fuel mixture.

Operate the chain saw only in

well-ventilated areas.

DO NOT operate a chain saw in a tree

unless you have been specifically trained

to do so.

All chain saw service, other than the

items listed in the user manual safety and

maintenance instructions, should be

performed by competent chain saw

service personnel.

When transporting your chain saw, use

the appropriate guide bar scabbard.

SAFETY RULES

Whenever the machine is in use,

safety glasses must be worn to

safeguard against flying objects.

Ear protection must also be used

in order to protect to operators

hearing. If the operator is

working in an area where there is

a risk of falling objects a safety

helmet must also be worn.

Make Sure the Chain Brake is

disengaged! Pull Hand Guard/

Chain Brake back to run.

This product is in accordance

with applicable EC directives.

Guaranteed sound power level

LWA accordance with directive

2000/14/EC + 2005/88/EC

Sound pressure level at 7,5

meters

Always use two hands when

operating the chain saw.

WARNING:

Danger

108

WARNING! Contacting the

guide bar tip with any object

should be avoided; tip contace

may cause the guide bar to

move suddenly upward and

backward. which may cause

serious injury.

Advertising
This manual is related to the following products: