Permasteel PG-50601SRL(N) - Manual (Page 14)

11
ASSEMBLY INSTRUCTIONS
STEP V:
ƒ Remove packing material from flame tamers, cooking grids and warming
rack , then place them in the proper positions shown below.
If separately rotisserie kit is available, please follow below assemble steps:
ƒ
Take out rotisserie parts from carton.
ƒ
Tread key washers and counter balance onto treaded end of rotisserie
rod ,next tread handle and tighten, slide shaft collar through other side of
rod followed by the two prongs, (forks should be pointing towards each
other) tighten thumb screws on shaft collar and prongs.
ƒ
Take out motor from the carton, and place it in the bracket.