Final installation checklist, Warning – Permasteel PG-50601SRL(N) User Manual

Page 28

Advertising
background image

25

PRE-START CHECKLIST:

Property damage, bodily harm, severe burns, and death could result from
failure to follow these safety steps. These steps should be performed after
the grill has been assembled, stored, moved, cleaned, or repaired, DO NOT
operate this grill until you have read and understand ALL of the warning
and instructions in this manual.

‰

Ensure that the grill is properly assembled.

‰

The LP regulator & hose connected to grill are provided by the manufacturer.

‰

Inspect the natural gas supply hose for burns, chaffing, kinks, and proper routing
before each use. If it is evident there is excessive abrasion or wear, or the hose is
cut, it must be replaced prior the grill being used.

‰

Leak check all gas connections and hose.

‰

All internal packaging removed.

‰

Burners are sitting properly on orifices.

‰

Knobs turn freely.

‰

Properly place the empty grease tray onto grease tray brackets to catch grease
during use.

‰

User informed of gas supply shut off valve location.

‰

Position your grill on lever ground in a well ventilated location, at least 36”
clearance maintained from combustible materials, buildings and overhangs.

‰

Ensure that all electrical supply cords are properly grounded. Keep any electrical
supply cord and the fuel supply hose away from any heated surfaces. Hose
should be at least 3 inches from hot surfaces.

‰

There is no unprotected combustible construction material over the grill.

‰

Do not obstruct the flow of combustion and ventilation air.

FINAL INSTALLATION CHECKLIST

WARNING

Advertising