Permasteel PG-50601SRL(N) - Manual (Page 19)

16
ASSEMBLY INSTRUCTIONS
If separately rotisserie kit is available, please follow below assemble steps:
ƒ
Take out rotisserie parts from carton.
ƒ Tread key washers and counter balance onto treaded end of rotisserie
rod ,next tread handle and tighten, slide shaft collar through other side of
rod followed by the two prongs, (forks should be pointing towards each
other) tighten thumb screws on shaft collar and prongs.
ƒ
Take out motor from the carton. And place it in the bracket.
STEP VI:
ƒ
When the grill island is in the desired location, lock the caster brakes of cabinets,
this will keep them in place for safe operation.