Proel RMW1000M - Manual (Page 12)

12
TECHNICAL SPECIFICATION
RMW1000 – UHF PLL 96 Channel Receiver
RF Channels
96 frequency preset for each frequency band
RF Frequency Band UHF: 606‐630 MHz or 638‐662 MHz or 863‐865 MHz
RF Receiver Type PLL UHF Synthesized
RF Modulation type FM (F3E)
RF Sensibility ‐105 dBm / 12 dB SINAD
RF Image/Spurious Rejection > 70 dB
RF Interference Rejection > 70 dB
RF Frequency Stability ± 0.005% (‐10 ÷ +50 °c)
THD Distortion < 0.8%
S/N Ratio > 90 dB
Dynamic Ratio > 105 dB
Frequency Response 50 Hz – 15 KHz (±3 dB)
XLR balanced nominal audio output ‐10 dBu (245 mV
rms
)
JACK unbalanced nominal audio output 0 dBu (775 mV
rms
)
Power Supply 12 V DC 600 mA
Dimensions (WxDxH) 197 x 134 x 42 mm
Weight 0.82 Kg
RMW1M – Handheld Microphone UHF PLL 96 Channels Transmitter
RF Channels
96 frequency preset for each frequency band
RF Frequency Band UHF: 606‐630 MHz or 638‐662 MHz or 863‐865 MHz
RF Power max 10 mW
Modulation method FM (F3E)
RF Max deviation ± 35 KHz compressor‐expander system
RF Frequency Stability ± 0.005% (‐10 ÷ +50 °c)
Spurious Emission under limits EN 300422
Frequency Response 50 Hz – 15 KHz (±3 dB)
Microphone type Dynamic Cardioid
Mic sensitivity 0 / ‐10dB
Power Supply 2x1.5V AA alkaline battery
Dimensions (WxDxH) 64 x 110 x 19 mm
Weight 0.29 Kg
RMW1H – Bodypack UHF PLL 96 Channels Transmitter
RF Channels
96 frequency preset for each frequency band
RF Frequency Band UHF: 606‐630 MHz or 638‐662 MHz or 863‐865 MHz
RF Power max 10 mW
Modulation method FM (F3E)
RF Max deviation ± 35 KHz compressor‐expander system
RF Frequency Stability ± 0.005% (‐10 ÷ +50 °c)
Spurious Emission under limits EN 300422
Frequency Response 50 Hz – 15 KHz (±3 dB)
Microphone included Headset condenser type Cardioid pattern