REMKO CMF-80 v.2 - Manual (Page 12)

REMKO CMF / CMT
■
The wall bracket is to be
fastened to the wall with the
supplied fastening materials and
the indoor module hooked on.
■ The wall must possess suffi cient
load-bearing capacity for the
weight of the indoor module.
■ Ensure that the wall bracket is
installed level.
■
The indoor module can be
aligned precisely by means of
the adjustment screws on the
rear side of the housing.
■ The indoor module is to be
mounted in such a way that
all of the sides have suffi cient
space for purposes of instal-
lation and maintenance.It is
equally important that there
is suffi cient space above the
device for installing the safety
module.
Only fi xing materials which
are suitable for the given ap-
plication may be used.
NOTE
Installation of the indoor unit
Indoor module CMF Series Indoor module CMT Series
■
The indoor module must be
installed on a fi rm, level surface.
■ The surface must possess suf-
fi cient load-bearing capacity
for the weight of the indoor
module.
■ The height-adjustable feet can
be used to precisely align the
indoor module.
■
The indoor module is to be
mounted in such a way that
all of the sides have suffi cient
space for purposes of instal-
lation and maintenance.It is
equally important that there is
also suffi cient space above the
device for installing the pipes
and safety module.
12