REMKO CMF-80 v.2 - Manual (Page 16)

REMKO CMF / CMT
Connection diagram
Electrical heater
Sub-distribution by customers
Connection outdoor unit
Connection indoor unit
Power plant clearing contact
Connection electrical heating
* 5-wire (example NYM-I 5x2,5 mm²)
3-wire (example NYM-I 3x4 mm²)
3-wire (example NYM-I 3x1,5 mm²)
* 5-wir
e (example NYM-I 5x2,5 mm²)
2-wir
e (example NYM-I 2x1 mm²)
4-wir
e
(example
NYM-I
4x1mm²)
Pump heating circuit 1
Pump heating circuit 2
Charge pump / U-valve
Mixer heating circuit 2
Pump cooling
Circulation pump
Reversing valve cooling
(not at CMF 80 and 140)
Clearance 2nd. heater.
The clamp confi guration depends on
the model!
Connection
Pilot wir
e
Outdoor unit
Indoor unit
Return
Collector
Tank
Intake heating circuit 1
Intake heating circuit 2
Process water
Collector
* The outdoor units of CMF 80, CMF 90 and CMT 100 have to be supplied by a 3-wir
e power cable!
The outdoor units of CMF 140, CMF 150 and CMT 250 have to be supplied by a 5-wir
e power cable!
The cr
oss section indicated have to be complied with the pipe length and kind of construction in or
der to the VDE
0900 and technical data!
Outdoor temperature
16