Rena T-250 - Manual (Page 18)

TROUBLESHOOTING
Media Feeding Problems:
Problem Possible Cause
Feeding Doubles
ƒ Media not properly fanned before loading.
ƒ Nested Media.
ƒ Reduce the distance between the separator
fingers and the feed roller.
ƒ Separator Fingers worn.
Media Not Feeding
ƒ Media not properly fanned before loading.
ƒ Side Guides too tight
ƒ Increase the distance between the separator
fingers and the feed roller.
ƒ Glazed or dirty feed rollers.
ƒ Feed Rollers worn.
Media Opening as it Feeds
ƒ Too much friction at the separation point.
Increase the distance between the separator
fingers and the feed roller by using 1-1/2
times the material thickness to set the
Metering Bracket.
Skewing
ƒ Media Side Guides too loose.
ƒ Metering Bracket/Separators not set evenly.
ƒ Separator Fingers or Feed Rollers worn.
T-250 Operations Rev. 2/5/2010 18