Rena T-250 - Manual (Page 20)

MAINTENANCE
Section 5 – Maintenance
This section describes maintenance that an experienced operator can perform. If service or
maintenance is needed, beyond what is described in this document, please contact your local
Rena dealer to obtain service and support for your tabber.
Service should only be performed by a qualified Rena service person.
To locate a Rena dealer in your area, please click on the following link and fill out the form.
http://www.renausa.com/dealerlocator.asp
Cleaning
WARNING
BEFORE PERFORMING ANY MAINTENANCE, DISCONNECT THE
TABBER FROM ITS POWER SOURCE!
The Tabber must be cleaned regularly of accumulated paper dust and ink. Unplug the tabber
from the wall outlet before cleaning...
The visible areas are best cleaned with a vacuum that has a soft brush attachment to help loosen
the dust particles.
The covers of the machine may be cleaned with any standard household cleaner, which is non-
abrasive and does not contain plastic harming solvents.
CAUTION
NEVER SPRAY OR POUR CLEANERS DIRECTLY ON OR INTO
THE TABBER. EXCESS LIQUID COULD HARM ELECTRONIC
PARTS. ALWAYS DAMPEN A RAG WITH THE CLEANER AND
APPLY IT TO THE PARTS TO BE CLEANED.
Feed Rollers and Forwarding Rollers
WARNING
DO NOT USE SOLVENTS TO CLEAN THE RUBBER ROLLERS
The feed and forwarding rollers can become glazed with paper lint and ink from the media. They
should be regularly cleaned with a mild abrasive household cleaner on a damp cloth.
Avoid using solvents on the rubber rollers.
20 T-250 Operations Rev. 2/5/2010