Rena EasyFeed 120 - Manual (Page 21)

EasyFeed_120_Operations_
4-25-14
21
STEP 5. Tighten the locking knob to secure the back wedge in place.
STEP 6. You can raise and lower the back wedge ramp to find the optimum height for
your stack. To adjust the ramp height, loosen the locking knob on the back of the wedge
upright and slide the ramp up or down to adjust. Then lock.
Step 7. You can adjust the angle of the back wedge upright for optimum results by loosening
the locking lever on the side of the wedge upright, and pivoting the back wedge ramp to the
desired angle.
Locking knob
Locking knob