Rena EasyFeed 120 - Manual (Page 25)

EasyFeed_120_Operations_
4-25-14
25
MAINTENANCE
CLEANING THE BELTS
CAUTION! UNPLUG THE FEEDER FROM THE WALL
OUTLET BEFORE PERFORMING THESE PROCEDURES!
Do not apply power to the feeder to clean the feed belts. Doing so presents a safety
hazard. Instead; rotate the feed belts by manually turning any of the drive shafts.
Clean the feed belts often, especially after running glossy material.
Do not use harsh chemicals on the belts as they can be damaged from the use of some
chemicals.
Do not use “Rena Care” roller cleaner on this unit. Doing so may cause belt damage.
A “citric based” cleaner is recommended for cleaning the feed belts. A light application of
isopropyl alcohol after using the citric cleaner may also be helpful.
Wipe any excess cleaners from the belts.
CLEANING THE FEEDER BODY
A coat of car wax or furniture polish on the paper guides will assist in smooth movement of your
media stack as it descends in the feed hopper. (BE CAREFUL NOT TO GET IT ON THE FEED
BELTS)
OBTAINING SUPPLIES, SERVICE, and SUPPORT
Please contact your local Rena dealer to obtain supplies, service and support.
To locate a Rena dealer in your area, please use the following link and fill out the form.
http://www.renausa.com/dealerlocator.asp
Service should only be performed by a qualified Rena service person.
In addition, you may wish to log onto Rena Systems web site (
www.renausa.com ), and click
on the “support” link. This area contains many useful resources.
Please use the following “Warranty Registration“ link to register your product with Rena
Systems.
http://www.renausa.com/support_warranty.htm