Royal Vacuums CH50102 - Manual (Page 14)

14
resettinG led indiCator liGht
4.17 When it is time to change the Brushroll or change the Secondary Filter, the indicator light above those
particular icons will illuminate and stay on (solid). Once the Brushroll or Secondary Filter has been
replaced, the indicator light will need to be manually reset. The indicator light ALWAYS needs to be reset
whenever the brushroll or secondary filter have been replaced.
To reset the indicator light , first turn the unit off, while making sure it is still plugged in. Take a paper clip or
pen tip and gently push the tip into the opening next to the . The “Brushroll Check” inidicator light will
begin to blink, signifying that you have activated the “reset” mode.
Upon activating the “reset” mode, the indicator light above the “Brushroll Check” icon will begin to blink first
(default), indicating that you have selected to reset the “Brushroll Check” indicator. Pushing the tip into
the opening next to the again will make the “Filter Full” light blink, indicating that you’ve selected the
“Filter Full” indicator to reset. Pressing the will toggle between the filter and the brushroll.
Once you’ve selected the correct indicator that you need to reset, push the paper clip or pen tip into the
opening next to the and hold it there until the indicator light turns off.
4.17