Smithco Super Star Diesel 43-500 (sn 14560 – 14579) Parts & Service Manual - Manual (Page 136)

C-29
Rear Attachment
26-007Q PROFESSIONAL INFIELD FINISHER PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 26-045 Leveling Screen 1
2 HNCL-58-11 Center Lock Nut 5 /
8
- 11 2
3 43-152 Drawbar 1
4 HB-58-11-300 Bolt 5 /
8
- 11 x 3 2
INSTALLATION INSTRUCTIONS
The Professional Field Finisher is used for smoothing and leveling fields to professional standards.
1. Attach leveling screen (Ref 1) to drawbar (Ref 3) using two bolts (Ref 4) and center lock nuts (Ref 2).
2. Mount Professional Field Finisher to the hitch on the trap rake by sliding the drawbar into the quick hitch
locking mechanism.
3. When Professional Field Finisher is attached, adjust bolts on hitch (Ref A) to hold Finisher in desired
position.
4. NOTE: When assembled properly, rake will angle down from front to back. If front of finisher is not higher
than the back, damage will result to infield.
5. When removing the attachment from machine. Push down on quick hitch locking mechanism and pull
accessory out.