Smithco Spray Star 1100e Operator Manual - Manual (Page 12)

10
Operation
OPERATION
Before operating the Spray Star 1100e, become familiar with all controls and functions. Also complete all mainte-
nance requirements and read all safety warnings. Knowing the Spray Star 1100e thoroughly, how it operates, and
by doing the prescribed maintenance steps, you can expect trouble free operation for years to come.
SAFETY
Safety needs to always be the concern of an operator of a moving vehicle or any machine with moving parts.
1. Keep all shields and guards in place.
2. Keep the parking brake engaged any time the operator is away from the vehicle or whenever service is
performed.
3. Always wear the necessary protective clothing and equipment.
DAILY CHECKLIST
1. Tire pressure should be 20 psi (1.4 bar) maximum.
2. Inspect the electrical system and battery cables for loose connections or frayed wiring. Replace any faulty
equipment or tighten if loose.
3. Check hardware for loose or missing nuts, bolts, screws, etc., and tighten or replace as needed.
4. Inspect the steering for clear travel.
5. Check controls for smooth, proper working operation. Lubricate as needed.
6. Check park brake adjustments. Adjust as required.
STARTING
To start the electric vehicle:
1. Apply the parking brake
2. Turn the key switch to the "ON" position
3. Move Forward-reverse switch in the desired direction
4. Release parking brake and depress the accelerator pedal.
Never leave the vehicle unattended running. Always bring the vehicle to a complete stop,
engage park brake, turn key off and remove key.
To avoid damage, the vehicle MUST be brought to a complete stop before moving the
forward-reverse switch.
TOWING UNIT
The Spray Star 1100e MUST be towed with the key and master disconnect in the OFF position.
HILLSIDE OPERATION
Do NOT stop or start suddenly on any slope. Be especially cautious when changing direction. Do NOT operate
on slopes greater than 10°.