Smithco Spray Star 1100e Operator Manual - Manual (Page 18)

16
Operation
CONSOLE FEATURES
This Console (PGM F) requires selection of US (acres); SI (hectares) or TU (1,000 sq ft) area
and SP2 (radar speed sensor). Hold SELF TEST key to view selection
A. POWER - Turns Console power OFF or ON. Turning Console OFF does not affect the data stored in
the computer.
B. FLOW CONTROL - Select manual or fully automatic control. This can automatically control two rates.
C. FLOW CONTROL - Manual override control provides capability for spot spraying.
D. Booms can be controlled individually, or all at once with MASTER ON/OFF Switch
E. Displays actual rate of application, calibration, and function data.
F. CE - Use like you do CE (clear entry) key on a calculator. This key is also used to select an area
base measurement of US (acres), SI (Hectares) or TU (1,000 sq ft).
GH.ENTER - Used only to enter the data into the Console.
Calibration Keys: (Top Row) Used to enter Function Keys: (Bottom Row) Used to display data.
data into console to calibrate the system.
BOOM 1 CAL Length of Boom 1 TOTAL AREA Total Area Sprayed
BOOM 2 CAL Length of Boom 2 FIELD AREA Field Area Sprayed
BOOM 3 CAL Length of Boom 3 FIELD VOLUME Volume Applied to Field
SPEED CAL determined by Speed Sensor DISTANCE Distance Traveled
METER CAL Flow Meter Calibration Number SPEED Speed of Vehicle
VALVE CAL Control Valve Response Time VOLUME/TANK Volume Remaining in Carrier Tank
RATE 1 CAL Target Application Rate TIME 24 hour clock (military time)
RATE 2 CAL Target Application Rate DATA MENU Printer Option
SELF TEST Simulates Vehicle Speed