Quick change gear box, Tailstock barrel, Mill/drill clutch, fine feed – Smithy GN1300 User Manual
Page 38
Advertising
Quick Change Gear Box
Use a spray can of lithium grease or motorcycle-chain lubricant. Spray inside the
quick-change gearbox through the slot for the powerfeed (1-7) selector.
Tailstock Barrel
Oil the two buttons on top of the tailstock.
Mill/Drill Clutch, Fine Feed
Oil the button on top of the mill/drill clutch housing.
Figure 5.14 Oil the Quick Change Gear Box through the Powerfeed Slot
Figure 5.15 Tailstock Barrel Oil Points
Figure 5.16 Mill/Drill Clutch Oil Points
5: Preparing Your Machine For Operation
5-8
Or Visit www.smithy.com
Advertising