Machine specifications, Granite 1324 series machine – Smithy GN1300 User Manual
Page 99
Granite 1324 Series Machine
General Specifications
General Dimension:
39” height X 46” length X 22-1/2” width
Machine Weight:
Shipping 770 lbs, Machine 661 lbs
Crate Size:
49-1/2” X 22-3/4” X 44”
Footprint (static):
48” X 36”
Footprint (operating):
72-1/2” X 45-1/4”
T-Slot Size:
7/16”
Spindle Accuracy TIR:
0.00078”
Powerfeed (X-Axis):
Yes
Powerfeed (Y-Axis):
Yes
Powerfeed (Z-Axis):
No
Table Size:
6-3/4” X 17-3/4”
Threading Dial:
Yes
Lathe Specifications
Distance Between Centers:
24”
Dial Calibration on Crossfeed:
0.001”
Dial Calibration on Toolpost:
0.001”
Dial Calibration on Leadscrew:
0.001”
Dial Calibration on Tailstock:
0.001”
Dial Calibration on Longfeed Rack:
0.01”
Headstock Taper:
MT4
Lathe Chuck- Max. diameter workpiece:
6”
Lathe Chuck- Min. diameter workpiece:
1/8”
Lathe Chuck Bore:
1.6”
Lathe Chuck Diameter:
6”
Lathe Chuck Mount:
D1-4 Camlock
Lathe Chuck Type:
3 Jaw Self Centering
Spindle Bore:
1.125”
Spindle Speeds:
Variable (Range 0-2800 RPM)
X-Axis Travel (w/ tailstock installed):
20”
Y-Axis Travel:
7-5/8”
Feed Rate (X-Axis):
0.003”- 0.020”
Feed Rate (Y-Axis):
0.001”- 0.006”
Tailstock Offset:
19/32”
Tailstock Barrel Travel:
3”
Tailstock Taper:
MT3
Swing Over Bed:
13”
Swing Over Work Table:
7-1/2”
Threads:
SAE 7-52 TPI
Toolbit Size:
1/2”
Toolpost Travel:
3-3/16”
13
Machine Specifications
13-1
For Assistance: Call Toll Free 1-800-476-4849