SoundFreaq SFQ-02RB - Manual (Page 12)

.11.
Notes for Caring Your iPod:
Charging an iPod
The battery of the iPod is always charged
through the unit when it is connecting to a wall
outlet except when the unit is operated in
battery mode.
 Charging begins when the iPod is set on the
dock.
 The charging status appears in the display on
iPod.
 Make sure the AC adapter is connected to
the unit.
 The iPod is charged regardless of the sound
source selected on the unit.
 See the iPod instruction manual about the
details of iPod charging.
1. Press the " " button to power on the system.
2. Set an iPod on the unit and press the DOCK
button to switch to the iPod mode if the unit
is not in the iPod mode.
Note: Before viewing a video/picture from
your iPod on your TV, tap the corresponding
application icon on the iPod to select a
picture/video.
3. Press the “ ” button to play the desired
track.
 The connector plug is protected with a cover
when it is first purchased. Please remove the
cover before operating the unit.
 Do not carry the unit with iPod connected.
You might drop it down or it might cause
damages to the connector part.
 Do not touch or hit the iPod terminal pins or
the connector pins directly. It might cause
damages to the connector part.
 If the iPod does not play correctly, please
update your iPod software to the latest
version. - For details about updating your
iPod, check on the Apple web site
<http://www.apple.com>.
 iPod is a trademark of Apple Inc., registered in
the U.S. and other countries.
 iPhone is a trademark of Apple Inc.
 iPad is a trademark of Apple Inc.
 We are not responsible for any loss of or
damage to iPod that might result from the
use of this product.
 Sound distortion may occur when playing back
audio sources with high recording levels.
When distortion occurs, it is recommended
to turn off the equalizer of the iPod. For
information on operating the iPod, see the
iPod instruction manual.
 If you do not turn on the power of this unit
and only connect the iPod to this unit, power
may be supplied to the iPod.
 "Made for iPod" and "Made for iPhone" and
"Made for iPad" mean that an electronic
accessory has been designed to connect
specifically to iPod/iPhone/iPad and has
been certified by the developer to meet
Apple performance standards.
 Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
Video cord (not supplied)
Back Panel
TV