Sundance SMT365 - Manual (Page 5)

Version 2.3 Page 5 of 28 SMT365 User Manual
Notational Conventions
DSP
The terms DSP, C64xx and TMS320C64xx will be used interchangeably throughout
this document.
SDB
The term SDB will be used throughout this document to refer to the Sundance Digital
Bus interface.
SHB
The term SHB will be used throughout this document to refer to the Sundance High-
speed Bus interface.
Register Descriptions
The format of registers is described using diagrams of the following form:
31–24 23–16 15–8 7–0
OFLAGLEVEL
R,00000000 RW,10000000 R,00000000 R,10000000
The digits at the top of the diagram indicate bit positions within the register and the
central section names bits or bit fields. The bottom row describes what may be done
to the field and its value after reset. Shaded fields are reserved and should only ever
be written with zeroes.
R Readable by the CPU
W Writeable by the CPU
RW Readable and writeable by the CPU
Binary digits indicate the value of the field after reset