Super Systems 7SL - Manual (Page 4)

4
CAUTION:
USE WIRE SUITABLE
FOR 75°C MINIMUM.
NOTES
• For supply connections use No 16 AWG or larger
wires rated for at least 75 °C.
• Use copper conductors only.
• Class 2 wiring must be a minimum of 1/4 inch from
any Class 1 conductors.
Table of Contents
1/16 DIN, FOUR DIGIT HIGH/LOW LIMITROL .......... 2
Guide to simple set-up ...................................... 3
MOUNTING REQUIREMENTS .................................. 5
DIMENSIONS AND PANEL CUTOUT ....................... 6
WIRING GUIDELINES ............................................... 7
PRELIMINARY HARDWARE SETTINGS ............... 12
CONFIGURATION KEY FUNCTIONS ..................... 14
CONFIGURATION PROCEDURE ........................... 14
OPERATING MODE ................................................ 20
Normal Display Mode ..................................... 20
Indicators ........................................................ 20
Key Functions in Normal Display Mode .......... 21
Parameter Display Mode ................................. 21
Key Functions in Parameter Display Mode ..... 21
OPERATING PARAMETERS ................................... 22
ERROR MESSAGES ............................................... 23
DEFAULT PARAMETERS ........................................ 24
SPECIFICATIONS ................................................... 26
CALIBRATION PROCEDURE .................................. 30
General Guidelines ......................................... 30
Calibration Parameters ................................... 30
Procedure ....................................................... 31
Entering Calibration Values ............................. 31
MAINTENANCE ....................................................... 35
7sl-0-00.p65 9/17/02, 2:35 PM 4