Daktronics All Sport 5000 - Manual (Page 223)

206 Volleyball Operations
13.4 Settings
The following settings can be edited by the user when EDIT SETTINGS has been selected
from the Main Menu.
Main Clock
Note 1: The settings entered for Main Clock are used with the
<SET MAIN CLOCK> key.
Note 2: The period, break, and overtime lengths are used differently depending on the
direction of the main clock. For count down, the main clock is set to the selected length,
decrements towards zero, and stops at zero. For count up, the main clock is set to zero,
increments towards the selected length, and stops when the selected length is reached.
LCD Display Action
MAIN CLOCK-MODE
TENTH SECOND? n
n = current setting
When the main clock is set to count down and tenths
of a second is selected, the main clock displays in
tenths of a second remaining when the time is below
one minute.
Press <YES> to set the main clock to display tenths of
a second.
Press <NO> to display whole seconds.
MAIN CLOCK-TIME
PERIOD mm:ss
mm:ss = current setting
Enter the correct amount of time per period in minutes
and seconds on the number pad and press <ENTER>.
For example, 60:00 per game.
MAIN CLOCK-TIME
break mm:ss
mm:ss = current setting
Set the amount of time for the breaks between games.
Enter the correct amount of time for breaks in minutes
and seconds on the number pad and press <ENTER>.
For example, 3:00.