Daktronics All Sport 5000 - Manual (Page 250)

Event Counter 233
Section 15: Event Counter
Sport Insert: 06-58047
The Sport Insert drawing is located at the end of this section. The Quick Reference is located in
Appendix D.
Reference Drawings:
Insert, Event Counter Codes........................................................................................Drawing A-58047
Refer to the information in Section 2 to start up the console and use the sport insert. Read Section 2
carefully to fully understand the following operation instructions. If an insert is lost or damaged, a
copy of the insert drawing located at the end of this section can be used until a replacement can be
ordered.
15.1 General Event Counter Information
Note: The All Sport 5000 uses Enhanced RTD with Venus 4600 / 7000 codes
The Event Counter program is made up of six codes used to display information about
external events. The codes used for event counter are shown below.
Day and Time Event Countdown Code
Venus 1500 RTD 371
Venus 4600/7000 Enhanced RTD 372
Time Base Counter Code
Venus 1500 RTD 373
Venus 4600/7000 Enhanced RTD 374
External Input Counter Code
Venus 1500 RTD 375
Venus 4600/7000 Enhanced RTD 376
RTD port settings are 19,200 Baud, 8 Data, and no parity for both Venus 1500 and
Enhanced RTD types.
15.2 Day and Time Event Countdown
LCD Display Action
DAYS nnn
HH:MM:SS ↓
HH:MM.SS = current value
DAYS nnn
HH:MM:SS ↑
If set to count down, the number of days, hours,
minutes, and seconds remaining until the event
occurs are shown on the main LCD screen.
If set to count up, the number of days, hours,
minutes, and seconds elapsed since the event
occurred are shown on the main LCD screen.