Daktronics All Sport 5000 - Manual (Page 324)

Water Polo Operations 307
(Continued from previous page)
LCD Display Action
MAIN CLOCK-TIME
BREAK mm:ss
mm:ss = current setting
Set the amount of time between periods.
Enter the correct amount of time for break length in
minutes and seconds on the number pad and press
<ENTER>.
For example, 1:00.
MAIN CLOCK-TIME
OVERTIME mm:ss
mm:ss = current setting
Set the amount of time for the overtime periods.
Enter the correct amount of time for overtime periods
in minutes and seconds on the number pad and press
<ENTER>.
For example, 5:00.
Shot Clock
LCD Display Action
SHOT CLOCK-TIME
RESET mm:ss*
mm:ss = current setting
This setting is used by the RESET button on the
remote shot clock control console.
Note: The current setting for the RESET time displays
on the LCD until the first number key is pressed.
Enter the correct amount of reset time in minutes and
seconds on the number pad and press <ENTER>.
For example, 00:45.
(Continued on next page)