Daktronics All Sport 5000 - Manual (Page 96)

Basketball Operations 79
(Continued on previous page)
LCD Display Action
SHOT CLOCK-EDIT
RESET 2 mm:ss*
mm:ss = minutes, seconds
Press <SET SHOT TIME> a second time to display
the configured time for shot clock Reset 2 length.
To accept the shot clock Reset 2 length press
<YES>.
To decline the selection of the shot clock Reset 2
length press <NO>.
To change the shot clock Reset 2 length and set the
shot clock enter the new time in minutes and
seconds on the number pad and press <ENTER>.
Press <CLEAR> twice to clear changes and return to
the game.
Note: The configured time of shot clock is set using
the EDIT SETTINGS function when a new code is
selected.
Recall Shot Time
LCD Display Action
shot clock -Mode
Recall y/n
Press <RECALL SHOT TIME> to recall the shot
time that was remaining before the last shot clock
reset was pressed.
To accept the recall press <YES>.
To decline the recall press <NO>.
Time Out On/Off
<
TIME OUT ON/OFF > stops and starts the time out clock. The length of both the full and
partial time outs can also be changed when the time out clock is stopped.
Note 1: Only the time outs configured in the
EDIT SETTINGS function are displayed on the
LCD and available for selection (please refer to the table on the following page).
Note 2: The up and down arrow keys can also be used to select the full and partial time outs.