Westermo TD-34 - Manual (Page 21)

21 6610-2203
+CSCA – SMS provider and protocol
This command sets the provider and protocol parameters used for sending a SMS message.
Syntax: AT+CSCA=<provider>,<type>,<password>
AT+CSCA=?
AT+CSCA?
<provider> SMS service provider number
<type>
SMS protocol type (0=NONE,1=UCP,2=TAP)
<password> SMS password (only for TAP protocol)
Examples: AT+CSCA=12345,1
OK
AT+CSCA?
+CSCA : PROVIDER=12345, PROTOCOL=UCP
OK
AT+CSCA=?
+CSCA : (0-16 CHAR), (0-2)
OK
Result Codes: OK <provider>,<type>,<password> = (0-16 CHAR),
(0-2), (0-8 CHAR)
ERROR Otherwise
+GCI – Country parameters
This extended syntax command selects and indicates the country of installation for the
modem.This parameter selects the settings for any operational parameters that need to
be adjusted for national regulations or telephone networks.
Syntax: AT+GCI=<value>
AT+GCI=?
AT+GCI?
<value>
= B5 Selects country code for America.
= FD Selects country code for Europé.
Examples: AT+GCI=FD
OK
AT+GCI?
+GCI : FD
OK
AT+GCI= ?
+GCI : (B5,FD)
OK
Result Codes: OK <value> = (B5,FD)
ERROR Otherwise