Westermo TD-34 - Manual (Page 28)

28 6610-2203
%L – Report Line Signal Level
Returns a value which indicates the received signal level.The value returned is a direct
indication of the receive level at the MDP, not at the telephone line connector.
For example, 009 = –9 dBm, 043 = –43 dBm, and so on.
L – Speaker Volume
Sets the speaker volume control.The parameter is written to S22 bits 0 and 1.
L0 Low Volume
L1 Low Volume (Default)
L2 Medium Volume.
L3 High Volume.
*L – Display Stored Passwords and Callback numbers
This commands displays stored Password and Callback numbers.
M – Speaker Control
Speaker Control command.The parameter is written to S22 bits 2 and 3.
M0 Speaker is always off
M1 Speaker is on during call establishment, but off when receiving a carrier. (Default)
M2 Speaker is always on.
M3 Speaker is off when receiving a carrier and during dialing, but on during answering.