Westermo TD-34 - Manual (Page 37)

37 6610-2203
*WIO – General IO list
This command handle the alarm IO (input and output).
Syntax: AT*WIO=<value>
AT*WIO=?
AT*WIO?
AT*WIO!
<value>
IO output relay state (0=OPEN, 1=SHORT)
Examples: AT*WIO=0
OK
AT*WIO?
*WIO : IN=0, OUT=0
OK
AT*WIO=?
*WIO: (0,1)
OK
AT*WIO!
IO TEST ('?' FOR HELP)
?
- HELP
+/- - INC/DEC PULSE (10 MS)
H - SET OUTPUT HIGH
L - SET OUTPUT LOW
S - START/STOP PULSES
1..9 - PULSE BURST
V - VIEW IO DATA
Q - QUIT TEST
OK
Result Codes: OK <value> = (0,1)
ERROR Otherwise