AEC 3-Pump 33-Station Controllers - Manual (Page 16)

3–Pump 33-Station Controllers Chapter 3: Installation 15 of 51
3-4 Setup
This section provides the procedures for configuring your 3-pump, 33-station controller.
Configuration of your controller includes setting the number of stations and pumps,
setting variables such as convey time and blow-back interval, and setting up passwords.
We recommend that you carry out these procedures in the order given here.
Note: Before carrying out these procedures, install all equipment as described
in this section and in the Mechanical Components manual.
Setting the Number of Stations and the Number of Pumps
Figure 1: Default “Station Status” Screen Before Setup
1. At the “Station Status” screen (Figure 1) or at the “Pump Status” screen, touch the Menu
button. The “Menu” screen opens.
Figure 2: “Menu” Screen
2. At the “Menu” screen, (Figure 2), touch the System Setup button. The “System
Setup” screen opens.