AEC 3-Pump 33-Station Controllers - Manual (Page 51)

3–Pump 33-Station Controllers Chapter 8: Appendix 50 of 51
Warranty Returns
Prior to the return of any material, authorization must be given by the manufacturer. A
RMS number will be assigned for the equipment to be returned.
Reason for requesting the return must be given.
All returns are to be shipped prepaid.
The invoice number and date or purchase order number and date must be supplied.
After inspecting the material, a replacement or credit will be given, at the manufacturer’s
discretion, if the item is found to be defective in materials or workmanship. Purchased
components are covered under their specific warranty terms.
8-6 Safety Tag Information
Controller Safety Tags
8-7 Controller Identification (Serial Number) Tag
(Located on the side of the controller box)
Street Address
Town, State, Zip Code
Telephone Number
Fax Number
XXX CONTROL PANEL
Model No. XXX3-33
Serial No. 31K0182
115 Volt 60 Hz 1 Ph
Control Voltage 24VDC
High Voltage
Inside Enclosure Read Operation and
Installation Manual