AEC 3-Pump 33-Station Controllers - Manual (Page 41)

3–Pump 33-Station Controllers Chapter 4: Operation 40 of 51
Silencing Alarms
Whenever a new alarm occurs, your controller sounds the horn and turns on the strobe light at
each central alarm.
Touch Alarm Silence on the alarm message banner that appears when a new alarm occurs
or press the physical push button included in the central alarm option.
The horns and lights at the central alarms turn off. Your controller has separate, configurable
settings for how long the horns should remain silent and how long the lights should remain
off. If the alarm condition still exists when either of these times elapses, the corresponding
device (horn or lights) turn on again and the alarm message banner appears with a
“Suppression/Silence Time Expired” message. If a new alarm occurs, both horns and lights
turn on. See page 45 for a list of alarms and their possible causes.