AEC OFC Series - Manual (Page 25)

OFC Series Extrusion Control Units Page 25
3. Setup & Diagnostics
3.1. Setup
Motorized Pot Control
3.1.1. Yield Control
Haul-off Weight/Length Control (Motorized Pot Control)
3.1.1.1. Motorized Pot RPM
3.1.1.2. Control Window
3.1.1.3. Maximum Control RPM
3.1.1.4. Rate Deviation
3.1.1.5. Length/Pulse
3.1.1.6. Weight/Length Format
Extruder Weight/Length Control (Motorized Pot Control)
3.1.1.1. Motorized Pot RPM
3.1.1.2. Control Window
3.1.1.3. Maximum Control RPM
3.1.1.4. Length/Pulse
3.1.1.5. Weight/Length Format
Extruder Speed Control (Motorized Pot Control)
3.1.1.1. Motorized Pot RPM
3.1.1.2. Control Window
3.1.1.3. Maximum Control RPM
Dual Control (Motorized Pot Control)
3.1.1.1. Haul-off Motorized Pot RPM
3.1.1.2. Extruder Motorized Pot RPM
3.1.1.3. Weight/Length Control Window
3.1.1.4. Rate Control Window
3.1.1.5. Haul-off Control RPM
3.1.1.6. Extruder Control RPM
3.1.1.7. Rate Deviation
3.1.1.8. Length/Pulse
3.1.1.9. Weight/Length Format
3.1.2. System Setup
3.1.2.1. Communications
3.1.2.1.1. Set Baud Rate
3.1.2.1.2. Set ID
3.1.2.2. Set Time & Date
3.1.3. Factory Setup
3.1.3.1. English or Metric Units
3.1.3.2. Set User Password
3.1.3.3. EC Options
3.1.4. Feeder Setup
3.1.4.1. Scale Calibration
3.1.4.2. Set Hopper Size
3.1.4.3. Set Alarm Actions
3.1.4.4. Set Startup Mode