1 introduction, 2 necessary documents, 3 models covered – AEC OFC Series User Manual
Page 9: 2 safety, 1general information
OFC Series Extrusion Control Units
Page 9
1
General Information
1-1 Introduction
This manual contains the basic information needed to operate and maintain our
standard AEC OFC Series extrusion control units.
The OFC extrusion control unit is a state of the art, simple to operate system that learns
the extruder rate and adjusts either the haul off or extruder speed to maintain a preset
weight per length. The units will self adjust to keep the product weight per length
adjusted for extruder throughput variations.
1-2 Necessary Documents
The items listed below are required for installation, operation, and maintenance of an
AEC OFC Series extrusion control unit. Additional copies are available from AEC.
Familiarize the appropriate personnel with these documents:
;
This Service manual.
;
The Customer Parts List.
;
Operation and Installation manuals for accessories and options selected by the
customer, where installed.
1-3 Models
Covered
This manual covers AEC OFC Series extrusion control units.