AEC Glacier Series Air and Water Cooler Portable Chillers - Manual (Page 20)

Glacier Series Portable Chillers Page 19
; Operating and Installation packet
; Electrical schematic and panel layout drawings
; Component instruction manuals
Re-inspect the container and packing material to see if you missed any smaller items during
unpacking. Determine that the item was not inadvertently taken from the area before you
checked in the shipment. Notify AEC, Inc. immediately of the shortage.
2-4 If the Shipment is Not Correct
If the shipment is not what you ordered, contact AEC, Inc. immediately. Include the order
number and item. Hold the items until you receive shipping instructions.
2-5 Returns
Important!
Do not return any damaged or incorrect items
until you receive shipping instructions from AEC, Inc.
2-6 Uncrating
Glacier Series portable chillers are shipped mounted on a skid, enclosed in a plastic wrapper, and
open-crated on all four sides and top.
1. Pry the crating away from the skid and remove.
2. Use a pry bar to remove the blocks securing the unit to the skid.
3. Lift the unit off the skid with a fork truck.
4. Insert forks between skid and portable chiller from the side until they protrude beyond
the opposite side of the unit. The forks must be equidistant from the center line of the unit
and the unit must be balanced on the forks.
5. Lift slowly and only high enough to clear the skid. Use a pry bar if necessary to remove
the skid from the unit.
6. Lower slowly. The unit will land on its casters and can be rolled into position.
Retain the crating for reshipping the chiller if you find hidden shipping damage.