Elation Professional DESIGN WASH 250 - Manual (Page 11)

10 DESIGN WASH 250 USER MANUAL V1.0 NR
Default settings shaded
VALU A001~A5XX (AXXX) DMX address setting
ADDR
SLAV ON/OFF (SLAV) Slave setting
ALON (AU-A) Automatic Run in Stand Alone
AUTO
MAST (AU-M) Automatic Run as Master
ALON (SO-A)
Sound-controlled Run in Stand
Alone RUN
SOUN
MAST (SO-M) Sound-controlled Run as Master
VALU D–XX D-00 (DXXX)
Display the DMX 512 value of
each channel
RDIS ON/OFF Reverse display
0 MODE
DISP
CLDI ON/OFF Shut off LED display
OPEN ON/OFF Lamp on/off
LAAU ON/OFF Lamp automated on with power
ONLI ON/OFF Lamp on/off via controller
1
LAMP
DELA D–XX D-05 Delay lamp on
RPAN ON/OFF Pan Reverse
RTIL ON/OFF Tilt Reverse
16BI ON/OFF Switch 16 bit/8 bit
DEGR 630/540 Pan degree select
MIC M-XX M-70 Mic sensitivity
AUTO ON/OFF Automatic Run by no DMX
SOUN ON/OFF Sound Run by no DMX
FANS HIGH/AUTO Fan’s mode select
REST Reset
LODA ON/OFF Restore factory settings
2
SET
VER V-1.0~V-9.9 Software version
LADJ ON/OFF Lamp adjustment
TEST T–01~T–30 Test function of each channel
CODE CXXX Fixture code *code is “C050”
3 ADJU
WHEL
CH01~CH30 XXXX(-128~127) Motor Fix
MATI 0000~9999(hours) Fixture running time
LATI 0000~9999(hours) Lamp running time
CLMT ON/OFF Clear fixture time
4 TIME
CLLT ON/OFF Clear lamp time
STEP S–01 ~S–48 Steps of Program Run
REC. RE.XX Auto Save Scene
C–01~C–30
0 1 XX(00~FFH)
3 0 XX(00~FFH)
Edit the channels of each scene
TIME T XXX(001~999) Time for each scene
5
EDIT
SC01
~ SC48
CNIN ON/OFF Edit program via controller