Elation Professional DESIGN WASH 250 User Manual
Page 7
6 DESIGN WASH 250 USER MANUAL V1.0 NR
CA UTION
Before taking into operation for the fi rst time,
the installation has to be approved by an expert.
Cautions:
The effect should be installed outside areas where persons may reach it, walk by or be seated.
CA UTION
When installing the device, make sure there is no highl y
inflammable material within a distance of min. 0,5m
Overhead mounting requires extensive experience, including amongst others calculating
working load limits, installation material being used, and periodic safety inspection of all
installation material and the device. If you lack these qualifications, do not attempt the
installation yourself. Improper installation can result in bodily injury.
CA UTION
The electric connection must onl y be carried out by a qualified electrician.
Before mounting make sure that the installation area can hold a minimum point load of 10 times the
device’s weight.
Connect the fixture to the mains with the power plug.